Midea Dishwasher Error Codes – What Do They Mean
Midea is a Chinese-owned electrical appliance manufacturer that started its journey in 1968. Since its beginning, the company made endless waves and got itself noticed by the world. Offering innovative products they offered consumers everything they have been dreaming about. All of that fits perfectly with the modern-day lifestyle that they craved.
In 2016 Midea Group finally got listed as a Fortune 500 company, and has been thriving since then. Offering consumers everything from water appliances, floor care, lights, cooking appliances, laundry machines, dishwashers, VRF systems, refrigerators, kitchen appliances, heating and cooling system, and so on.
When working with a Midea dishwasher you may face an issue at one point, we suggest you write down the code and run it using the database listed below. To help you find the issue at hand without getting frustrated we have listed down Midea dishwasher error codes that can help you narrow down the issue in a matter of minutes.
Codes Table
| Error Codes | Solution |
|---|---|
| E1 | The water supply is turned off. Turn the water supply on. |
| Defective water fill valve. Replace the water fill valve. | |
| Low water pressure. Minimum water pressure of 20 PSI. | |
| Obstructed water fills valve or hose. Disassemble and clean the water fill valve and hose. | |
| Damaged or defective wiring. Repair the wiring. | |
| Defective pressure switch for high water level safeguard. Replace the pressure switch. | |
| Defective flowmeter. Replace the flowmeter. | |
| Heavy water usage elsewhere in home. Use dishwasher when water usage is at a minimum. | |
| Defective PCB assembly. Replace the PCB assembly. | |
| E2 | Damaged or defective drain pump. Replace the drain pump. |
| Replace the drain pump Drain hose was obstructed or snapped. Put the hose in the right way. | |
| Defective micro-switch. Replace the micro-switch. | |
| Too dirty the inner of the bobber base. Replace or clear the bobber base. | |
| Damaged or defective wiring. Repair the wiring. | |
| Defective the electric control. Replace the electric control. | |
| E3 | The voltage too low. Minimum voltage of 198V. Replace the thermostat 2 or the fuse. |
| Damaged or defective wiring. Repair the wiring. | |
| Damaged thermostat 1. Replace the thermostat 1. | |
| Damaged the heating element. Replace the heating element. | |
| Defective the electric controller. Replace the electric controller. | |
| E4 | Defective micro-switch. Replace the micro-switch. |
| Damaged or defective wiring. Repair the wiring. | |
| Defective the electric control. Replace the electric control. | |
| E5 | Damaged water valve. Replace the valve. |
| E6-E7 | Check the NTC or PCB. If the NTC thermistor is ok, but the alarm still be set off, the PCB might have defect. |
| Defective micro-switch. Replace the micro-switch. | |
| Defective ortoo dirty the inner of the bobber base. Replace or clear the bobber base. | |
| Damaged or defective wiring. Repair the wiring. | |
| Defective the electric control. Replace the electric control. | |
| Salt leakage (for equipped with softener) | The cover of the softener be loosed. Tighten the cover. |
| The o-ring of the cover be inversed. Replace the cover. | |
| Not operate after push start key | Door was not closed. Close door. |
| Damaged or defective door switch. Replace door swich. | |
| Damaged or defective door lock. Replace door lock. | |
| Damaged or defective wiring. Repair wiring. | |
| Defective electric control. Replace electric control. | |
| The control interference to panel. Repair the panel or control. | |
| Fillwater not stop even no power. | Defective water fill valve. Replace water fill valve. |
| Debris buildup under diaphragm in the water fill valve. Clean out debris or replace water fill valve. | |
| Fill water not stop, but stop if no power | Defective electric control. Replace electric control. |
| Too less fill water | Low water pressure. Minimum water pressure of 0.03Mpa |
| The pipe was snapped. Put the pipe in the right way | |
| The sump or the filter was obstructed. Clearthe sump and filter. | |
| Defective micro-switch. Replace micro-switch. | |
| Dishwasher not level. Level the dishwasher. | |
| Dishwasher runs with door open | Damaged or defective door switch. Replace door swich. |
| Damaged or defective door lock. Replace door lock. | |
| Damaged or defective wiring. Repair wiring. | |
| Defective electric control. Replace electric control. |
Note: in the narration of this manual, the number in brackets behind the part stands for the serial number of the part in the explosion diagram. The actual configuration may be different.
When some malfunctions occur, the appliance will display error codes to warn you:
- E1: Longer inlet time. Faucet is not opened, or water intake is restricted, or water pressure is too low.
- E3: Not reaching required temperature. Malfunction of heating element.
- E4: Overflow. Some element of dishwasher leaks.
- Ed: Communication anomaly. It should be repaired by a qualified worker.
Control Panel
Maintenance and Cleaning
Filtering System
The filter prevents larger remnants of food or other objects from getting inside the pump. The residues may block the filter. In this case they must be removed.
Filter Assembly
The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each washing cycle by rinsing the semicircular filter and cup under running water. To remove the filter device, pull the cup handle in a upward direction.
How to Keep Your Dishwasher in Shape
- After Every Wash
- Removing the Plug
- No Solvents or Abrasive Cleaning
- When Not in Use for a Long Time
- Moving the Appliance
- Seals
Parts Meaning
Manual Pdf
- Samsung Refrigerator Error Codes List - March 10, 2025
- KitchenAid Oven Error Codes and Troubleshooting - March 10, 2025
- iLife Robot Vacuum Error Codes and Troubleshooting - March 10, 2025
Once power is turned on the Delicate light starts flashing and beeping. The beeping stops after 10 – 15 seconds but the delicate light keeps flashing and no other buttons work.
The dishwasher is less than 6 months old. Any ideas as to what is wrong?
Thank you!
my midea dishwasher flashes on delicate, will not change to any other cycle. how do I fix this?
Hi Dona, thanks for asking,
Solutions For Midea Dishwasher Delicate Light Blinking;
1.Restart: To restart your Midea dishwashers, simply unplug the power cord and put it back in after a few minutes.
2.Loose Door Latch: You need to repair the door latch immediately to ensure the proper working of your dishwasher.
3.Clogged Drain Hose: When the drain hose gets clogged, water won’t go out of it properly, and the delicate light may start flashing.
4.Improper Temperature: If the temperature of the water is not hot enough, the dishwasher won’t be able to fully wash the dishes, and the delicate light will blink to alert you.
if you have any additional questions, please write us again, have a good day!
My comfee dishwasher keeps leaking and flashing E1 I have tried to do the resetting but it still shows E1
The model is KWH-FD1435E-W any help would be greatly appreciated.
The Error code comes on part way through the cycle as well as it beeping.
Hi. i have a table top midea and an error code Ef comes on. Please assist?