Electrolux Dishwasher Error Codes and Troubleshooting
Electrolux dishwasher error codes play a crucial role in identifying issues that affect the appliance’s functionality. These codes swiftly inform users of the nature of the malfunction, enabling them to understand and address the problem efficiently. Each code represents a specific issue, facilitating quicker and more effective repairs of the device. This article explains the significance of Electrolux dishwasher error codes and how they assist users.
Codes List
Parts Meaning
Care and Cleaning
To remove and clean the filters
Dirty filters decrease the washing results. Although the maintenance is very low with these filters, make a check at intervals and if necessary, clean them.
- Turn the filter (A) counterclockwise and remove it out from filter (B).
- Filter (A) has two parts. To disassemble the filter, pull them apart.
- Fully clean the parts with water.
- Put the two parts of the filter (A) together and push. Make sure that they engage correctly in each other.
- Remove the filter (B).
- Fully clean the filter (B) with water.
- Put the filter (B) to its initial position. Make sure that it engages correctly in the two guides (C).
- Put the filter (A) into position in filter (B). Turn the filter (A) clockwise until it locks.
Troubleshooting
| Trouble | Possible Solution |
|---|---|
| The appliance does not fill with water. | The water tap is blocked or there is limescale on it. Clean the water tap. |
| The water pressure is too low. Contact your local water authority. | |
| The water tap is closed. Open the water tap. | |
| The filter in the water inlet hose is blocked. Clean the filter. | |
| The connection of the water inlet hose is not correct. Make sure that the connection is correct. | |
| The water inlet hose is damaged. Make sure that the water inlet hose has no damages. | |
| The appliance does not drain the water. | There is a blockage in the sink spigot. Clean the sink spigot. |
| The connection of the water drain hose is not correct. Make sure that the connection is correct. | |
| The water drain hose is damaged. Make sure that the water drain hose has no damages. | |
| The anti-flood device is on. | Close the water tap and contact the service centre. |
| The start of the washing programme does not occur. | The appliance door is open. Close the appliance door. |
| The mains plug is not connected in the mains socket. Connect the mains plug. | |
| The fuse in the fuse box is damaged. Replace the fuse. | |
| The delay start is set. Cancel the delay start. When the countdown is completed, the washing programme starts automatically. | |
| The dishes are not clean. | The washing programme was not applicable for the type of load and soil. Make sure that the washing programme is applicable for the type of load and soil. |
| You did not put the items correctly in the baskets, water did not touch all surfaces. Put the items correctly in the baskets. | |
| The spray arms could not turn freely. Incorrect position of the items in the baskets. Make sure that an incorrect position of the items do not cause the blockage of the spray arms. | |
| The filters are dirty or not assembled and installed correctly. Make sure that the filters are clean and correctly assembled and installed. | |
| The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient. | |
| Limescale particles on the dishes. | The salt container is empty. Fill the salt container with dishwasher salt. |
| Incorrect level of the water softener adjustment. Adjust the water softener with the correct level. | |
| The salt container cap is not closed correctly. Make sure that the salt container cap is closed correctly. | |
| There are streaks, whitish stains, or a bluish layer on glasses and dishes. | The rinse aid quantity is too high. Decrease the rinse aid quantity. |
| Dry water drop stains on glasses and dishes. | The rinse aid quantity is too low. Increase the rinse aid quantity. |
| The dishes are wet. | The washing programme was without a drying phase or with a decreased drying phase. For better drying results, keep the door ajar for some minutes. |
| The dishes are wet and matt. | The rinse aid dispenser is empty. Fill the rinse aid dispenser with rinse aid. |
| The multitab function is on (this function automatically deactivates the rinse aid dispenser). Activate the rinse aid dispenser. |
Manual
Appliance Expert at ErrorCodesList.com
ErrorCodesList.com is a reputable error code provider firm. The main challenges are fault code and a problem-solving blog. We've written articles to address your concerns. Do not forget to write to us the fault codes that you cannot find. Appliance Expert contact: dylanjoseph@errorcodeslist.com Call: 916-954-2677
Latest posts by Dylan Joseph (see all)
- Samsung Refrigerator Error Codes List - March 10, 2025
- KitchenAid Oven Error Codes and Troubleshooting - March 10, 2025
- iLife Robot Vacuum Error Codes and Troubleshooting - March 10, 2025
