Westinghouse Refrigerator Error Codes

Westing Electric company founded in 1886, by George Westinghouse – was originally registered as Westinghouse Electric & Manufacturing Company. The company was renamed in 1945, and since then has seen a great deal of change in terms of growth and leadership. Its leadership is the reason the company was able to withstand a lot of transactions, and offered some of the best products the market has seen.

While being known for its dishwashers, the company also produced other household appliances such as refrigerators. Offering customers effective and efficient appliances that can help shape a better lifestyle. Focusing on offering smart choices the brand was known to offer top-of-the-line technology that matches your modern lifestyle.

Offering you the best sometimes comes with a few hiccups in the form of error codes. To ensure you can easily tackle them and focus on your day we have listed down all the Westinghouse refrigerator error codes that you might face.

Contents

Codes List

Search:

Error Codes	Meaning
E0	No error
E1	Evaporator sensor damaged
E2	Room temperature sensor damaged (installed on the display board)
E4	Room temperature sensor damaged (installed on the power board)
E5	0 degree compartment sensor damaged
Er	http://IM/RAM Error. Check J4-4, J4-5 and J4-6 Connector on Icemaker board. Check J4 connector at Main Control board. Check 15 pin inline connector at control board, Pin#’s 4,9 & 14. If all connections test good, control board.
t3	TH3 Sensor (open or short) Go to flow chart for Ice t3
CE	IM Com Lost Go to flow chart 50C. Put into service mode to verify.
OP - Normal	Freezer Sensor OPEN
SH - Normal	Freezer Sensor SHORTED
Normal - OP	Fresh Food Sensor OPEN
Normal - SH	Fresh Food Sensor Shorted
SY - EF	Evaporator Fan Failure
SY - CE	Communication Error
SY - CF	Communication Failure
Ec	Master PCB receive communication failure
Ed	If defrost fault , it will show "Ed", otherwise display "--"
EF	If fan motor trouble, it will show "EF", otherwise display "--"
Cr	Communication Error. If you see this icon displayed (Ice & Water model) or the top temperature icon is flashing it means that the control has lost contact with the main control board. The appliance will operate at its last known setting, all auxillary functions will not work. Turn the unit off at the power point for 5 minutes and then turn it back on. Under most circumstances this will reset the display enabling normal function to continue. If the error re-occurs then call for service.
Oc	Sensor – Open Circuit / Short Circuit. If you see this icon displayed (Ice & Water model) or any combination of the second and fourth temperature icons are flashing it means that an error has been detected on a sensor. The refrigerator will run in a default cycle to prevent food spoilage.
Sc	Sensor – Open Circuit / Short Circuit. If you see this icon displayed (Ice & Water model) or any combination of the second and fourth temperature icons are flashing it means that an error has been detected on a sensor. The refrigerator will run in a default cycle to prevent food spoilage.
tr	Ice cube tray water fill not detected. This error indicates that when an ice harvest occurred and a tray water fill was attempted, that the tray sensor did not get above 0°C. Check the following: Water turned on at tap, water filter not blocked, no kinks in water tube. If after checking these items and they do not appear to be the cause of the error, call for service.
Fh	No Water Entering Machine or Pressure Switch Failure

Control Panel

Westinghouse Refrigerator Controls – Bottom mount ice & water and French door ice & water models-min — Westinghouse Refrigerator Controls – Bottom mount ice & water and French door ice & water models

Replacing the water filter

You should change the water filter every six months to ensure the highest possible water quality. If your refrigerator has not been used for a period of time (during a house move for example), change the filter before reinstalling the refrigerator. It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement.

Ensure that the ice maker is turned off.
Remove the filter by turning anti-clockwise 180.
Slide the old water filter cartridge straight out of the housing and discard it.
Unwrap the new filter cartridge and using the alignment guide, slide it gently into filter housing until it stops against the filter connection at the back of the housing.
Engage the filter by firmly rotating clockwise until the filter snaps into position (once engaged the filter cannot be rotated further).
Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.
After filling one glass of water, continue flushing the system for about four minutes.
Turn on the ice maker.
When the filter has been replaced press and hold the ‘Ice and Water’ button for three seconds to reset the filter replace timer

Troubleshooting

Appliance does not operate at desired temperature. In a modern frost free refrigerator / freezer, cold air is circulated around the various compartments through air vents using a high efficiency fan.

Search:

Trouble	Solution
Refrigerator is too warm	Ensure food is allowed to cool before placing inside the refrigerator.
	Ensure the appliance is set up as per instructions.
	Ensure that contents are not obstructing the cooling vents.
	Ensure the door is not held open or is being opened too frequently
Freezer is too warm	Adjust temperature to a colder setting.
	Ensure food is allowed to cool before placing inside the freezer.
	Ensure the appliance is set up as per instructions.
	Ensure that contents are not obstructing the cooling vents.
	Ensure the door is not held open or is being opened too frequently.
Food is freezing in the refrigerator	Adjust temperature to a warmer setting.
	Ensure that fruit and vegetables are stored in the crisper. Items with a high water content should not be placed near the cooling vents.
Unable to change temperature settings	Refer to Refer to sections “temperature control” and “about the user interface”. Ensure that user interface is in "awake" mode before trying to adjust temperature settings.
Motor noise (compressor)	Nothing. This is normal as your new refrigerator uses a high-speed compressor which switches on and off during operation.
	Note that the compressor noise may seem louder at the start of the on cycle.
A clicking noise heard just before the compressor starts.	Nothing. This is normal as your new refrigerator has an automatic switching action of the temperature control, turning the compressor on and off.
Occcasional gurgling, similar to water boiling.	Nothing. As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your refrigerator system.
Airflow noise.	Nothing, this is normal as your new refrigerator uses high efficiency fans to circulate air. Fan speed and noise may increase during periods of heavy usage or hot weather.
Rattling and other noises.	Ensure that the cabinet is level and stable, refer to Installation Instructions.
	Check the surrounds of the appliance to ensure there is nothing touching or placed on top of the appliance.
	Ensure that contents of the appliance are not placed in such a way that they are vibrating (such as bottles).
Excess moisture build up in crisper	Ensure that the crisper is not over packed.
	Adjust crisper humidity slides.
Crisper bin can not be removed	If crisper bin interferes with the door bins, remove door bins before removing crisper.
	Position cabinet so that the door can be fully opened.
Freezing items in the crisper	Adjust temperature to a warmer setting.
Appliance will not run It is normal for the freezer fan not to operate during the automatic defrost cycle, or for a short time after the appliance is switched on.	Ensure that the cord is plugged into a live power outlet and outlet is switched on.
	Ensure that the household circuit breaker has not tripped or that the fuse has not blown.
	The appliance maybe in defrost mode, check again in half an hour.
Compressor motor seems to run too long At normal room temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more often.	Ensure that the doors are not held open Check that large amounts of warm food have not just been placed inside the appliance. Note that the appliance will run more than normal just after you install it or when adjusting to temperature setting changes.
The exterior of the appliance is warm or hot to touch This is normal because the appliance transfers heat from the inside out through the outer panels and the divider between the doors.	Ensure the appliance has the external clearances recommended in the section “Installing your new appliance”.
	The exterior of the cabinet will be much warmer on warmer days it may even feel hot to touch, as the appliance is working harder.
User interface will not respond To ensure settings are not accidentally changed the user interface will go into sleep mode when not in use. Press any button to wake user interface.	Check that the user interface is in awake mode, refer to section “About the user interface”. Check that the user interface is not locked, refer to section “About the user interface”. If the user interface is frozen turn the appliance off for five minutes for the memory to clear, then turn back on. Check that the user interface is not in Sabbath Mode, refer to control instructions. (I&W models only).
Alarms Sounding	Check that all doors are fully closed.
	Ensure that the over temperature alarm is not being activated by hot food placed in the freezer.
	Check if the drinks timer has ended, refer control instructions.
	Check if the Filter Replacement alert is activated, refer control instructions. (I&W models only)
Frost build up	Check that all doors are fully closed.
	Ensure that the doors are not opened too often.
	Ensure that the return air vents are not blocked with packaging.
	Ensure the seals are clean and not obstructed.
Odours	The interior may need cleaning, refer to cleaning guide.
	Ensure that food is stored correctly as some food, containers and wrapping can produce odours.
	Check appliance for old or unusual food.
Lights not working The LED lighting is designed to turn on gradually.	Ensure that the cord is plugged into a live power outlet and outlet is switched on. Ensure that the household circuit breaker has not tripped or that the fuse has not blown. Check that the user interface is not in Sabbath Mode, refer to control instructions. Check the appliance features section to determine lighting configuration for your model.
Freezer door pops open.	This is normal and should re-close. This happens when the refrigerator door is closed too quickly. If the freezer door stays open, it indicates that the appliance needs to be tilted backwards a little further. Refer to section “Installing your new appliance”.
Self close not working.	Check if your appliance has self closing hinges as not all models do. It indicates that the appliance needs to be tilted backwards a little further. Refer to section “Installing your new appliance”.
Door not sealing properly	Ensure there is nothing that is preventing the door from closing such as appliance contents or items placed near the appliance. Ensure that the crisper/freezer bin is closed completely. Refit if required as referred to in the section "Using your refrigerator". Ensure the appliance is set up as per recommendations.
Door difficult to open and close	If the door is difficult to open just after you have closed it this is due to the pressure equalising, the door will open normally after a few minutes.
Ice maker does not produce ice or not enough ice The icemaker is designed to produce a tray of ice approximately every 3 hours, depending on the conditions.	Ensure that the cord is plugged into a live power outlet and outlet is switched on.
	Ensure that water is connected and turned on and there are no kinks in the water line
	Ensure that the Ice Maker is switched on at the user interface refer to "About the User Interface" for details.
	Check that the water filter is not blocked or out of date.
	Check the water supply flow rate.
	If the freezer compartment is too warm, refer to "freezer is too warm" then wait 24 hours for the freezer to reach ideal temperature.
	Turn the unit off at the mains and leave for 2 minutes then turn the appliance back on (this will reset the icemaker unit). Check for ice production after 24 hours.
	Check that there is no obstruction under the ice maker and ensure the ice bin is fitted correctly.
Water dispenser not functioning	Ensure that the cord is plugged into a live power outlet and outlet is switched on. Ensure that water is connected and turned on and there are no kinks in the water line. Ensure that the Water Dispenser is switched on at the user interface refer to "About the User Interface" for details. Ensure water line is purged refer to “Ice & Water installation”. Check that the water filter is not blocked or out of date. Check the water pressure, refer to “Ice & Water installation”
Ice or water has bad odour or taste	Cover food to ensure ice does not absorb foreign odours.
	Check that the water filter is not out of date
	Interior of appliance or ice bin may require cleaning, refer to “Cleaning your refrigerator”.
	Discard stale ice monthly and allow ice maker to produce a fresh supply

Manual

Westinghouse Refrigerator User Manual PDF – Top Mount, Bottom Mount, French Door & Single Door

Author
Recent Posts

Dylan Joseph

Appliance Expert at ErrorCodesList.com

ErrorCodesList.com is a reputable error code provider firm. The main challenges are fault code and a problem-solving blog. We've written articles to address your concerns. Do not forget to write to us the fault codes that you cannot find. Appliance Expert contact: dylanjoseph@errorcodeslist.com Call: 916-954-2677

11 Comments

Danielle Kirkham says:

February 19, 2021 at 11:06 am

my westinghouse 2 door has a CL code that keeps poping up and the freezer is not freezing properly. I have only had this fridge/ freezer about 5 years max

1. Dylan Joseph says:
  
  February 20, 2021 at 9:10 pm
  
  CL mean: doors open, reset at power wall switch, (OFF-ON) Still CL flashing comes back.
  
Robert Newey says:

July 20, 2021 at 5:42 am

I have a Westinghpus WHE6874, about 5 or 6 years old. Error code ER CE has just come. I have taken the ice container out and cleaned it but this did not help. What could be the problem?

1. Greg says:
  
  January 23, 2022 at 12:44 am
  
  Hi,
  Your main board needs reconditioning.
  Take a look on eBay.
  
Karen Weier says:

August 4, 2021 at 9:42 pm

Hi, our ‘door open’ sensor is lit and beeping even though the doors are closed. The interface pad won’t respond to any touch. It’s been a day or so. Is there anything simple that could be causing this?
Thanks.

Sue says:

January 16, 2022 at 8:43 pm

Hi I have a Westinghouse double door fridge, the code UR is flashing, how do I fix this
Thanks Sue

Peter says:

May 15, 2022 at 8:32 am

Hi, I have a Westinghouse French door model WHE6060SA. Lights have stopped working and error code Sb or 5b. Unable to locate what the code means. Fridge is still running.
Thanks Peter

1. Paul says:
  
  May 25, 2022 at 2:40 am
  
  Hi Peter, I had similar problem a few years back. Turned out to be on the “Sabbath Mode” Google it and it will explain how to turn it off. Try Pressing and holding both – freezer side and + fridge side for 5 seconds.

Westinghouse Refrigerator Error Codes – How to Fix Them

Codes List

Control Panel

Troubleshooting

Manual

Smeg Refrigerator Error Codes – Meaning and Solutions

Kenmore Refrigerator Error Codes and Troubleshooting

LG Refrigerator Error Codes (Complete List)

Asko Refrigerator Error Codes – How To Solve

Hisense Refrigerator Error Codes and Troubleshooting

Electrolux Refrigerator Error Codes List

11 Comments

Leave a Reply Cancel reply

Codes List

Control Panel

Troubleshooting

Manual

Similar Posts

11 Comments

Leave a Reply Cancel reply